VS production: Europe. Miga Ocean Cosmos Ceramic 8906 Machine 43.5MM VS 2018 Shaft Works! All-black ceramic ocean universe 600 meters "deep sea black" anti-scratch not afraid of old!
.
1: Equipped with VS home-made all-in-one 8906 movement all-in-one natural rubber belt.
.
2: Break through the European patent bottom cover one step positioning, "naiad" lock structure, a little rotation can be locked, the bottom cover font always maintain a fixed position. Ensure that the lock does not affect water resistance. (Ceramic processing is more difficult than metal processing more than 10 times)
.
3: The internal and external structures are finished by the whole ceramic polishing.
.
4: Ceramic and titanium logo mosaic technology Ceramic titanium buckle. Since ancient times, there have been many legends about the ocean, and people's curiosity about the deep sea has never stopped. Inspired by the legend of ocean exploration, Omega launched the new Omega Sea Horse Series Ocean Universe "Deep Sea Red" watch black watch in the spirit of pioneering pioneers of ocean exploration. OMEGA Omega sea horse series 215.92.46.22.01.002 watches (keywords: sea horse series, copyright@VS hall-level quality, Korean imported ceramic case, CAL.8906 custom fully automatic movement, size: 45.5 mm).
.
VS factory Omega Ocean Universe 600 meters ceramic deep-sea red men's mechanical watch evaluation
.
.
With a diameter of 45.5 mm, each "dark in the deep sea" case is made of a whole piece of black ceramic, which is another notable highlight of the watch.
.
Domestic also has a re-engraving manufacturers very quickly launched PVD / DLC and other steel shell plating (that is, steel shell electroplating a layer of black paint) version. As we all know, no matter how good electroplating, a long time, there will be oxidation of color-changing lamps, poor plating will even become a block of paint. And in daily use, it is also possible because of sweat, daily grinding, resulting in paint loss. For example, the situation in the figure above.
.
So why vs. vs. Omega Ocean Cosmos 600 meters deep-sea black can be "anti-scratch, anti-old, anti-oxidant"
.
This "dark sea" is not just a "ceramic shell" so simple. , from the ceramic raw materials, ratio, burning process infinitely close to the original. The entire case is not only the pursuit of similar appearance, and the entire shell sleeve's internal structure, accessories, are infinitely close to the 1:1 re-engraving. This "deep-sea black" shell sleeve structure has two pioneering actions:
.
1: The internal and external structures are finished by the whole ceramic polishing. Also to ensure that it is waterproof and able to dive to a new level in the ceramic watchmaking process, this is Omega in the watch is a pioneering move.
.
2: Break through the European patent bottom cover one step positioning, "naiad" lock structure, a little rotation can be locked, the bottom cover font always maintain a fixed position. VS version of the "dark sea" bottom cover is also the same as the original, but also matte black ceramic
.
3: Ceramic and titanium logo mosaic technology Ceramic titanium buckle. The same clasp as the genuine material. Ceramic buckle surface and titanium folding buckle, even the button is also a ceramic
.
Equipped with VVS self-produced all-in-one 8906 movement all-in-one natural rubber belt. Another key point to mention is its movement:
.
The function of the movement. VS dedicated 8906 movement, the only able to achieve movement functions consistent with the genuine, including GMT function. Movement appearance and genuine has been infinitely close, stability is also experienced time verification, walking is very stable, repair rate is very low.
.
Let's explore what the process of making VS this one-in-one ceramic shell is like.
.
Raw material: Zirconium oxide powder
.
This white powder is a ceramic shell set raw material called zirconia. The "darkness of the deep sea" raw material is the use of this high-purity zirconia powder. What is high purity? That is to say, the whiteer the purity, the better! The high temperature sintered out the higher the hardness of the ceramic.
.
Injection molding:
.
To add a certain proportion of raw material powder adhesive (up to six months of experiments, groping out the proportion and formula) stirred into ceramic slurry into the machine injection molding, and then need to use hundreds of tons of hydraulic machine compression molding. This process is very important, if the raw material powder has impurities, ceramic slurry formula proportion is not correct, compression force and length of time, may lead to crude embryo in the sintering process appear a lot of sand holes, cracks, directly for waste. There are a lot of uncertainties that lead to a very high rate of bad products in ceramics.
.
The coarse mold embryo in the picture below comes out, you can see that the rough embryo is white at this time.
.
Injection after high temperature sintering for the first time:
.
Ceramic rough embryo to go through more than 1400 degrees Celsius furnace plasma high temperature sintering, ceramic will shrink hardening.
.
The shell body has hardened after the first high temperature sintering, the feel is a bit like the feeling of thick remodeling glue, the material changes really wonderful.
.
In order to explain to you that the ceramic shell does not have the color of the situation, specially found a knife to cut fruit. The hard shell ear place, cut down some black scraps, you can see that the peeled powder and the inside of the shell have been burned from white to black by high temperature. By the way, vsPam441's ceramic shell and this "dark sea" ceramic shell are more hard than most common metals, scratches may be metal powder on the ceramic shell, so with a wet towel or fine sandpaper gently wipe it.
.
Second high temperature sintering:
.
After a second number of hours of plasma high temperature sintering after the shell body, become extremely hard, this is the fruit knife can not hurt it. Technicians at the factory say ceramics should be several times harder than common metals. The sound of tapping on the shell body will have a pleasant, crisp sound.
.
Use a screwdriver to scratch the body, with white scratches, but with a finger wipe, white scratches are gone.
.
Sinter before and after comparison:
.
The original relatively large crude embryo sintered into a strong ceramic, sintered at high plasma temperature, constantly shrink hardening, out of the semi-finished volume of at least one-third of the shrinkage before sintering. Screening out the shell body has sand holes, cracks of bad products directly scrapped, good products into the next process.
.
CNC machine roughing:
.
After sintering to carry out CNC machine roughing, the excess cape and corner material removed from the
.
Processing center finishing:
.
Processing center finishing, the shell into the fixed groove, because the pre-set drawing size input computer, CNC machine will automatically polish the structure, completely without human intervention.
.
Hand polishing and polishing:
.
The polished shell body is polished with diamond strips, and the sand shell body is pulled and polished. Shell ears should also be polished, further improve the texture, each step is the need for skilled master's fine grinding, every detail, every accessory is hard-won.
.
Put several different periods of shell body together, you can ceramic shell body in the process of processing changes
.
Ceramic ring port:
.
Ceramic circle:
.
Ceramic bottom cover:
.
Ceramic buckle face:
.
Finally, take a look at the ceramic accessories:
.
Seeing the first look at this watch, it was really attractive, the black shape is simply too handsome! The watch's case as a whole is made of black ceramic with a diameter of 45.5mm, which has three advantages under the high-end process of VS factory," "anti-scratch, anti-old, antioxidant", and the performance of other versions of the explosion industry.
